200 Ton Die Spotting and Tryout Hydraulic Press

• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Automatic Grade: Automatic
• Structure: Frame
• Voltage: Optional
• After-Sales Service Provided: Engineers Available to Service Overseas
• Advantage: High Cost Performance and High Production
• Power Source: Hydraulic
• Controller: PLC
• Worktable Size: up to Clients′ Requirement
• Color: Optional
• Transport Package: Standard International Wooden Case or Iron Pallet
• Specification: set
• Trademark: ZHENGXI
• Origin: China
• HS Code: 8462919000
• Production Capacity: 200set/Yeat

Product Description

Die Spotting Hydraulic press Machine

Cold Extrusion is to force the plastic flow of gold chips, through the gap between the punch and the die or the exit of the die, to create a hollow or a part with a smaller section than the blank. If the blank is extruded without heating, it is called cold extrusion. Cold extrusion is one of the chipless and less chip parts processing technology, so it is an advanced technology method in the plastic processing of gold chips. If the blank is heated to a temperature below the recrystallization temperature for extrusion, it is called warm extrusion. Warm extrusion still has the advantage of less swarf.

Features

1.At present, the general dimensional accuracy of cold extrusions developed in China can reach 8-9 grades. If the ideal lubrication is used (refers to the pure aluminum and copper parts), it is second only to the surface of fine polishing. Therefore, the parts produced by the cold extrusion method generally do not need to be reprocessed, and only a small number of parts need to be finished (ground).

2. The utilization of cold extruded parts can usually reach more than 80%. For example, the utilization rate of the piston cutting and cutting processing materials of the Liberal brand automobile is 43.3%, while the material utilization rate is increased to 92% when the cold extrusion is used; and if the universal joint bearing sleeve is changed to cold extrusion, the material utilization rate is from the past. 27.8% to 64%. It can be seen that using cold extrusion to produce mechanical parts can save a lot of steel and non-ferrous metal materials.

3.Because cold extrusion adopts the cold working strengthening characteristic of metal material cold deformation, that is, the metal blank is in a three-direction compressive stress state during the extrusion process, and the material structure is dense after deformation and has a continuous fiber flow direction, so the strength of the workpiece is relatively large. improve. In this way, low-strength materials can be used instead of high-strength materials. For example, in the past, 20Cr steel was used to manufacture Liberated brand piston pins through cutting. Now, No.20 steel has been used to make cold-extrusion piston pins. After performance determination of various indicators, cold extrusion method is higher than cutting processing method to manufacture piston pins.

Parameter

Model		unit	Yz98-100A	Yz98-200A	Yz98-315A	Yz98-400A
Capacity		KN	1000	2000	3150	4000
Return force		KN	500	700	1000	1200
Max.pressure of liquid		MPA	25	25	25	25
Slider stroke		MM	2300	2500	2500	2500
Open height		MM	2500	2800	2800	2800
Max.capacity of turn over device		KN	100	150	200	250
Max.turn over angle of turn over device		.	180	180	180	180
Speed of slider	rapid down	MM/S	60	80	100	100
	slow down	MM/S	15.00	15.00	15.00	15.00
	micro inching	MM/S	0.5-2	0.5-2	0.5-2	0.5-2
	slow rising	MM/S	15.00	15.00	15.00	15.00
	rapid rising	MM/S	80	80	80	80
Worktable dimension	L-R	MM	4000	4600	4600	5000
	F-B	MM	2200	2500	2500	3000
Moving table stroke		MM	2400	5200	5200	6200
Total power		KW	30	44	52

 

After-sale service

1.Personnel training
Free training for about one week.

2. After-sale service
One year warranty.During warranty period,free maintenance service can be provided.(except man-made faults or damages arising from irresistible natural factors)

3.Installation
Customers need to pay the commission to our proffessional engineer, and travel expense is on foreign customer.(Including round ticket and accommodation cost)